Filter
Top Products
Menu Item Description
NOTE: You can only disable this option if C States option in Custom mode
is disabled.
NOTE: When C States is enabled in Custom mode, changing the Monitor/
Mwait setting does not impact system power/performance.
Editing system security
You can use the System Security screen to edit some settings such as setting the system password, setup
password and disabling the power button.
1. Go to System Setup Main Menu, and then click System BIOS.
2. On System BIOS, click System Security.
The System Security screen is displayed.
System security screen settings
The System Security Settings screen details are explained as follows:
Table 21. System security settings
Menu Item Description
Intel AES-NI Improves the speed of applications by performing encryption and
decryption using the Advanced Encryption Standard Instruction Set and is
set to Enabled by default.
System Password Sets the system password. This option is set to Enabled by default and is
read-only if the password jumper is not installed in the system.
Setup Password Sets the setup password. This option is read-only if the password jumper
is not installed in the system.
Password Status Locks the system password. By default, the Password Status option is set
to Unlocked.
TPM Security
NOTE: The TPM menu is available only when the TPM module is
installed.
Allows you to control the reporting mode of the Trusted Platform
Module (TPM). By default, the TPM Security option is set to Off. You can
only modify the TPM Status, TPM Activation , and Intel TXT fields if the
TPM Status field is set to either On with Pre-boot Measurements or On
without Pre-boot Measurements.
TPM Information Changes the operational state of the TPM. By default, the TPM Activation
option is set to No Change.
TPM Status Displays the TPM status.
TPM Command
CAUTION: Clearing the TPM results in the loss of all keys in the
TPM. The loss of TPM keys may affect booting to the operating
system.
Clears all the contents of the TPM. By default, the TPM Clear option is set
to
No.
39