Filter
Top Products
6. CHART OVERVIEW
6-7
How to operate the buttons on the InstantAccess bar
The InstantAccess bar has four types of buttons: toggle button, drop-down list button,
slider bar button, and speciality button. (The MOB, Capture and Undo buttons are spe-
cialty buttons that provide a single-action function.) The buttons can be operated with
the trackball module or the InstantAccess knob. This section shows you how to op-
erate the buttons with the InstantAccess knob.
1. Push the InstantAccess knob to enable its use with the InstantAccess bar.
2. Rotate the InstantAccess knob to select a button. The background color of the
button selected is light blue.
3. Do one of the following depending on button type.
1) Toggle button: Push the knob to select setting.
2) Drop-down list button or slider bar: Rotate the knob to select an item or ad-
just the slider bar. Push the knob to confirm your selection or setting.
Note 1: You can use the ESC key to go back one step in the current operating
sequence.
Note 2: The InstantAccess knob can only adjust the slider bar on the
InstantAccess bar.
Record Displays Event log (user event, POSN event), NAV log (Voyage, Details, Chart
Usage), Target log (Danger Target).
Selects a color palette, day, dusk or night.
Adjusts the brilliance of a FURUNO monitor unit.
MOB Inscribes the MOB (ManOverBoard) mark.
Takes a screenshot.
Restores previous condition in route and user chart creation.
Toggle button Drop-down list button Slider bar button
Button name Description
(Palette)
(Brilliance)
(Capture)
(Undo)
OFF
(gray)
ON
(light-blue)
[Palette] button
Palette
choices