Filter
Top Products
2. STEERING MODES
2-12
2.5.2 180° turn
This function changes the current set course by 180° in the opposite direction. This
feature is very useful in a man overboard situation and whenever you want to steer
back on a reciprocal heading.
2.5.3 360° turn
This function also provides a continuous turn feature with a constant rate of turn in a
circle. This feature is useful in purse seining.
2.5.4 User turn
You can set desired turn angle with this turn, from 15° to 360° in 15° degree incre-
ments.
How to set the turn angle for the user turn and start the turn
1. Select [USER TURN TO PORT] or [USER TURN TO STBD] from the Turn menu.
2. Press the X key.
3. The cursor is selecting the value for [TURN ANGLE]; push the Course control
knob.
4. Rotate the Course control knob to set the turn angle then push the knob.
5. To start the turn, rotate the Course control knob to select [RUN] then push the
knob.
TURN OF USER SETTING DATA
TURN ANGLE: 45 ° RUN