Filter
Top Products
4. HOW TO CUSTOMIZE YOUR NAVPILOT
4-6
4.1.3 Speed calculation
Speed is normally entered automatically, from your navigator. If the navigator fails,
manually enter speed.
1. Rotate the Course control knob to select [SPEED CALCULATION] from the [PA-
RAMETER SETUP] menu.
2. Push the Course control knob to show the options for [SPEED CALCULATION].
3. Rotate the Course control knob to select [AUTO] or [MANUAL] then push the
knob. For [AUTO] go to step 4. For [MANUAL], do as follows:
1) Rotate the Course control knob to select the current value then push the
knob.
2) Rotate the Course control knob to set a value (0.1 - 99.0).
4. Push the Course control knob to finish.
4.2 Rudder Drive Level (For Fantum Feedback
TM
)
For Fantum Feedback
TM
, the driving power of steering can be adjusted by the rudder
drive level. The higher the setting is, the greater the rudder is turned.
1. Press the MENU key.
2. Rotate the Course control knob to select [RUDDER DRIVE LEVEL] then push
the knob.
3. Rotate the Course control knob to set a value (1 - 20) then push the knob.
4. Press the MENU key to finish.
MANUAL
AUTO