Furuno NAVpilot-700 Marine Instruments User Manual


 
5. MAINTENANCE, TROUBLESHOOTING
5-10
5305 "APP WIND SPEED ALARM" Apparent wind alarm violated (sailboats
only).
5307 "SPEED ALARM" Speed alarm violated.
5309 "WATER TEMP ALARM" Water temperature alarm violated.
5311 "DEPTH ALARM" Depth alarm violated.
5313 "TRIP ALARM" Your boat has travelled the distance set
for the trip alarm.
Error
1101 "TOO FAST TO GO FISHING
MODE. PLEASE SLOW DOWN
LESS THAN 10 kn."
Set speed below 10 knots then go to re-
spective mode.
1201 "COMMUNICATION ERROR" No communication between processor
unit and control unit. Turn off power.
1203 "FU REMOTE CONTROLLER
ERROR"
Check remote controller.
1301 "MISSING HEADING DATA" Check heading sensor.
1303 "HEADING DATA IS SHIFTED" Heading data has changed abruptly.
Check heading sensor.
1305 "NO SPEED DATA. PLEASE
CHECK SPEED SOURCE OR
ENTER MANUAL SPEED VAL-
UE IN PARAMETER SETUP."
Check the speed source or enter the
speed manually.
1307 "NO WIND DATA" Check wind sensor.
1309 "WIND DATA IS SHIFTED" Wind data has changed abruptly. Check
wind sensor.
1311 "NO NAV DATA. WAIT FOR 1
SECONDS."
Check nav data sensor.
1315 "DEGRADATION OF NAV DATA
QUALITY"
Check nav data sensor.
1317 "NO POSITION DATA" Check position-fixing equipment.
1901 "RATE SENSOR ERROR" Check rate sensor.
1903 "BACKUP ERROR" All user and engineer default settings are
restored. Reenter installation settings.
Fail
0001 "DRIVE UNIT ERROR" Turn off power
0003 "DRIVE UNIT OVERLOAD" Turn off power.
0005 "DRIVE UNIT IS OVER- HEAT-
ED"
Temperature of drive circuit is higher than
80°C(176°F). Turn off power.
0007 "BYPASS/CLUTCH DRIVE ER-
ROR"
Bypass/clutch error. Turn off power.
Error
no.
Error message Meaning, remedy