Filter
Top Products
2. STEERING MODES
2-20
3. To turn off the REMOTE mode, turn off the remote controller
Control is returned to the main control unit and the mode that was originally active
(AUTO or NAV) is restored. For the NAV mode, the boat will go to the destination way-
point based on the (COURSE or XTE) nav steering method menu setting.
2.8.2 Button-type remote controller (FAP-6211, FAP-6212), Dodge-
type remote controller (FAP-6231, FAP-6232), Lever-type re-
mote controller (FAP-6221, FAP-6222)
These controllers can be used in the STBY, AUTO and NAV modes. (The dodge-type
controller is not shown.)
The button-type controller has an ON/OFF switch and works like an NFU remote con-
troller and a dodge remote controller. In the NFU mode the user operates the remote
controller to move the rudder and the rudder stops once operation of the remove con-
troller is stopped. The dodge-type remote controller sets your course and the rudder
is moved to steer the set course.
1. For button-and lever-type remote controllers, turn on the remote controller. The
dodge-type remote controller doesn't have a power switch, it can be operated by
simply pressing the direction buttons.
How to power button-and lever-type remote controllers