Garmin 278 Marine GPS System User Manual


 
Compass Page Options Menu
Use the options menu on the Compass Page to customize the
Compass Page. For denitions of data eld options, see page 120.
Press MENU to open the Compass Page options menu.
Set Up Page Layout—select the page layout.
Show Course Pointer/Show Compass—toggle between
showing the Course Pointer, which shows how far off you are
from your course and how to get back on course, or show the
compass arrow. The Course Pointer is also referred to as a CDI
or Course Deviation Indictor.
Show (Hide) Bug Indicator—shows the course to steer bug
indicator (the purple tick mark on the compass ring).
Change Data Fields—change onscreen data elds.
Using the Marine Timer
The Marine Timer, specically designed for sail boat racing, allows
you to easily count up or down by specied time increments. As
is common in sail boat racing, there is often a 5-minute warning
countdown, followed by a 4-minute preparation countdown, and
nally a one-minute nal countdown. Then during the race, mariners
might want to count up to keep track of their time.
You can use your GPSMAP 278 to perform each of these different
countdowns.
To open the Marine Timer:
1. Press MENU on the Compass Page.
2. Use the ROCKER to highlight Set Up Page Layout, and
press ENTER.
3. Highlight 2 Columns With Timer, and press ENTER. The
Marine Timer appears in the lower-right corner.
50 GPSMAP 278 Owner’s Manual
MArIne Mode PAges > coMPAss PAge