Filter
Top Products
110
Settings
NMEA 0183 Output
Controls NMEA 0183 sentences used, allowing you to select the type of messages
your unit will transmit when communicating with other NMEA 0183 devices.
To access NMEA 0183 Output screen:
1. Select NMEA 0183 Output from the
Network menu and press ENTER.
2. Select NMEA 2000 output sentences
and press ENTER.
3. Select the desired category and
press ENTER to reveal the NMEA
0183 sentences.
4. Highlight the desired sentence to
turn it on/off.
5. Press EXIT.
Vessels (only available if connected to AIS receiver)
Controls settings used to monitor vessels transmitting
AIS information in your area. That makes it easier to
navigate safely through high trafc areas.
To access the Vessels menu, select Vessels from the
Settings menu and press ENTER.
MMSI (Maritime Mobile Service Identity)
You need to have your own MMSI number entered into the HDS system to be able
to receive addressed messages from AIS vessels.
To input MMSI number:
1. Highlight MMSI on the Vessels menu
and press ENTER.
2. Use the keypad to input the MMSI
number and press ENTER.
NMEA 0183 Output sentences
screen
Vessels Menu
NOTE: To display MMSI messages, you must turn on the
“Vessels message” option in the Alarm Settings menu.