Filter
Top Products
76
Settings
Time Period
Controls how much time will pass before a point is placed along the trail.
To set Time Period:
1. Highlight Time Period and press
ENTER. The distance period key-
pad will appear.
2. Input the desired distance and se-
lect OK. Press ENTER.
Phantom Loran
Uses GPS and Loran coordinates to calculate Loran position.
To set up phantom loran:
1. Select Phantom loran on the Navigation menu and press ENTER.
2. Highlight Loran Settings and press
ENTER. The Loran settings
menu will appear.
3. Select the desired GRI (Group
repetition interval) and press
ENTER.
4. Select the Preferred Station and press ENTER.
5. Highlight Save and press ENTER.
Loran Settings Menu
Time Period set to 5 seconds