Filter
Top Products
37
Sonar
Start Logging
A sonar log is a recording of sonar activity displayed on
the sonar page.
To record a sonar log, highlight the Start Logging button
and press ENTER.
When a sonar log is being recorded, a blinking red circle
will be displayed in the upper left-hand corner of the
screen and a logging message will appear periodically
at the bottom of the screen.
To stop logging:
1. Select Stop from the Sounder Logging
menu and press ENTER. The Stop
Logging menu will appear.
2. Highlight the Stop Logging button
and press ENTER.
Source
Allows you to select the sonar source for your unit. You can select your unit as the
source, or choose another unit on your ethernet network, allowing you to share sonar
returns from one unit with other units on the network.
To share/receive sonar data:
1. Press MENU twice, select Sonar and press ENTER. Make sure the
units sharing sonar have network sonar turned on.
2. Press EXIT twice.
3. Access the Sonar page, on the unit that will be sharing its sonar
(master).
4. Press MENU, select Source and press ENTER.
5. Select This unit and press ENTER.
6. Press EXIT.
Stop Logging menu
Indicator blinks when
sonar is being recorded
NOTE: To stop receiving shared sonar, turn off network sonar
on the desired units.