Filter
Top Products
97
Settings
Sidelobe suppression (BR24 only)
Sidelobes are false returns caused by the reection of your ra-
dar signal. Sidelobe suppression helps reduce the impact of
sidelobes on your radar display. The default Auto mode will
work well under most conditions.
To make manual adjustments Sidelobe suppres-
sion:
1. Press MENU twice.
2. Select Radar and press ENTER.
3. Select Installation and press ENTER.
4. Highlight Sidelobe suppression and press ENTER.
5. Highlight Sidelobe suppression and press the keypad
left/right to make manual adjustments.
6. Press EXIT.
Reset Radar to Factory Defaults
Resets radar to factory default settings.