Filter
Top Products
74
Settings
To adjust cursor settings:
1. Highlight the desired cursor setting and press ENTER. A dialog box
will appear.
2. Use the arrow keys to select the desired value and press ENTER.
About
Used to view your unit’s current software version. To check the unit’s software
version, highlight About on the System menu and press ENTER.
Pages
Used to make adjustments to overlay data, combo page
panels and to turn on/off SIRIUS radio (if applicable).
Overlay data setting adjustments are covered in the
Pages section.
Navigation
Allows you to make adjustments to arrival radius, cross-
track error, trail and loran settings.
Arrival Radius
Arrival radius settings is the distance at which you will
be alerted when approaching your destination.
XTE limit
The cross-track error setting, is the distance at which you will be alerted when you
are drifting off course.
To adjust Arrival radius and XTE limit:
1. Select the desired option from the Navigation menu and press
ENTER.
2. Follow the onscreen instructions.