Filter
Top Products
16
Pages
Conguration menu
Allows you to Add/Remove sources and adjust Bezel, Caption
and Invert Text Settings. Other conguration menu options are
covered previously in the section.
To access the Conguration menu, highlight Conguration on
the Edit Overlay menu and press ENTER.
Conguration Settings
Bezel
Adds a bezel to the data overlay gauge, making it easier to
see against certain backgrounds
Caption Allows you to add/remove data label from gauge
Invert Text Changes appearance of data overlay text
Add Source
Displays the same type of data from different sources on the same analog gauge.
If, for example, you have multiple engines, you could select port engine RPM as your
data type and then display starboard engine RPM using the Add source command.
Both data sources could be displayed simultaneously on an analog gauge with two
needles; one dedicated to each source.
To add a source:
1. Select Add source from the Edit Overlay menu
and press ENTER.
2. Highlight a category and press ENTER. A list of
subcategories will appear.
3. Select the desired subcategory and press
ENTER.
To remove add source data:
1. Highlight Remove source on the Edit overlay
menu and press ENTER.
2. Select the source you want to remove and press
ENTER.
Add Source menu
Showing RPM from
two engines.