Filter
Top Products
63
Radar
Sea Clutter
Allows you to select the Sea Clutter adjustment mode — Auto or Manual. If you
make changes to Sea Clutter when it is in auto mode (Harbor or Offshore), Sea Clut-
ter will switch to Manual mode.
Sea Clutter Options
Manual Switches Sea Clutter from Auto to Manual mode
Harbor Auto setting optimized for harbor-like environment
Offshore Auto setting designed for offshore conditions
Acquire Targets
Used to select MARPA (Mini Automatic Radar Plotting Aid) targets. Refer to the
Radar Settings segment in the Settings section for information on using MARPA.
Position
You can move the PPI (Plan Position Indicator) to different locations on the radar
display. There are three Position options: Center, Look Ahead and Offset.
To change the PPI position:
1. Select Position from the Radar menu and press ENTER.
2. Select the desired position and press ENTER.
Look Ahead: PPI moves down,
allowing you to see more of what
is in front of you
Center: PPI centered on the
display