Omron CS1W-DRM21 Marine RADAR User Manual


 
4
Overview of DeviceNet Section 1-1
Configurator Features
Enables user-set allocations for remote I/O (choice of node address order,
2 area allocations, etc.).
Enables serial connection to the Programming Device Port of a PC.
Enables user settings for DeviceNet remote I/O communications connec-
tions.
Enables multiple Masters on a single PC.
Enables multiple Masters in a single network.
Slave Features
I/O Terminals
Provide general-purpose I/O via terminal blocks (M3).
Available in the following models:
8-point Transistor Input Terminal
16-point Transistor Input Terminal
8-point Transistor Output Terminal
16-point Transistor Output Terminal
Environment-resistant Terminals
Improved I/O Terminals that conform to IP66 for spatter-, water-, and oil-
resistance.
Available in the following models:
8-point Transistor Input Terminal
8-point Transistor Output Terminal
16-point Transistor I/O Terminal (8 inputs and 8 outputs)
Remote Adapters
Used in combination with G70D and other I/O Blocks to handle relay out-
puts, power MOS FET Relay outputs, etc.
Available in 16-point input and 16-point output models.
I/O Link Units
More than one I/O Link Unit can be mounted to a CQM1 PC.
Link 16 inputs and 16 outputs between the PC and the Master.
Sensor Terminals
Accept inputs from photoelectric and proximity sensors with connectors.
Available in 16-point input and 8-point input/8-point output models.
Output signals can be used for sensor teaching and external diagnosis.
Analog Input Terminals
Convert analog inputs to binary.
Switchable between 2 and 4 input points using the DIP switch.
Handle inputs of 0 to 5 V, 1 to 5 V, 0 to 10 V, 10 to +10 V, 0 to 20 mA, or
4to20mA.
Analog Output Terminals
Convert binary data to analog outputs.
Provides outputs of 1 to 5 V, 0 to 10 V, 10 to +10 V, 0 to 20 mA, or 4 to
20mA.
Available in models with a resolution of either 1/6,000 or 1/30,000.