Omron CS1W-DRM21 Marine RADAR User Manual


 
54
Installing the DeviceNet Unit Section 2-2
Provide separate conduits or ducts for the I/O lines to prevent noise from
high-tension lines or power lines.
Leave the label attached to the Unit when wiring. Removing the label may
result in malfunction if foreign matter enters the Unit.
Remove the label after the completion of wiring to ensure proper heat dis-
sipation. Leaving the label attached may result in malfunction.
CS1W-DRM21
CJ1W-DRM21
Remove the label after wiring.
1
12
3
4
2
3
4
HOLD
ESTP
DR1
DR0
MS
ON
Remove the label after wiring.