Filter
Top Products
126
Multi Zone—Continued
In addition to your main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And,
you can select a different source for each room.
Zone 2 speakers must be connected to an amp in Zone 2.
Connecting Your Zone 2 Speakers
You can enjoy 2-channel stereo playback in Zone 2 and
a different source to those selected for your main room
and Zone 3.
Hookup
• Use an RCA audio cable to connect the AV control-
ler’s ZONE 2 PRE OUT L/R jacks to an analog audio
input on your Zone 2 amp.
• Use an RCA audio cable to connect the AV control-
ler’s ZONE 2 PRE OUT SW jack to the line input on
a powered subwoofer in Zone 2.
• Connect your Zone 2 speakers to the speaker terminals
on your Zone 2 amp.
Note:
With the default settings, the Zone 2 volume must be set
on the Zone 2 amp. If your Zone 2 amp has no volume
control, set the “Zone2 Out” setting to “Variable” so that
you can set the Zone 2 volume on the AV controller (see
page 128).
Zone 2 Video Outputs
The AV controller features a composite video output and
component video output for connection to a TV in Zone
2, so you can enjoy both audio and video in that zone.
Hookup
• Use a composite video cable to connect the AV con-
troller’s ZONE 2 OUT V jack to a composite video
input on your Zone 2 TV.
• Alternatively, use a component video cable to connect
the AV controller’s COMPONENT VIDEO ZONE 2
OUT jacks to a component video input on your Zone
2 TV.
• If you use the COMPONENT VIDEO ZONE 2 OUT,
you must set the “Zone2 Component Out” setting to
“Use” (page 128).
Notes:
• The ZONE 2 OUT V jack outputs video from compo-
nents connected to composite video inputs.
• If you use the ZONE 2 OUT, you must set the “Zone2
Component Out” setting to “Use” (page 128). The
ZONE 2 OUT outputs video only from components
connected to component video inputs.
Connecting Zone 2
AV controller
Main room
Zone 2
Powered
subwoofer
Receiver/
integrated amp
Multichannel power amp
AV controller
TV
Main room
Zone 2
TV