Filter
Top Products
46
First Time Setup—Continued
Carry out the settings for the AV controller by using the
Onscreen Setup Menu.
The settings of the AV controller can be changed using
the Display.
Onscreen Setup Menus and Display
As each item in the Onscreen Setup Menus is selected,
the selected items will be displayed one by one.
Note:
During Audyssey MultEQ
®
XT Room Correction and
Speaker Setup, messages, etc., that are displayed on the
TV screen will appear in the Display.
Using the Onscreen Setup Menus
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
Tip:
On several functions, the explanation
will be displayed under the screen.
2
Use the Up and Down [ ]/[ ] but-
tons to select item and then
press [ENTER].
The submenu appears.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return to
the previous menu.
SETUP
RECEIVER
ENTER
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Menu
Using the Display to change the
settings
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu item appears on the
display.
2
Use the Up and Down [ ]/[ ] but-
tons to select item and then
press [ENTER].
The submenu item appears on the
display.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return to
the previous menu.
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Menu
Onscreen Setup Menus
Display