Filter
Top Products
52
First Time Setup—Continued
If you connect a component to the AV controller’s analog
multichannel input, you must assign that input to an
input selector. For example, if you connect your DVD/
BD player to the multichannel input, you must assign it
to the DVD/BD input selector.
If you connect a component to the AV controller’s
balanced input, you must assign that input to an input
selector. For example, if you connect your CD player to
the balanced input, you must assign it to the CD input
selector.
Notes:
• To listen to the component connected to the multi-
channel input or balanced input, press the [AUDIO]
button and select the “Audio selector” (see page 114).
• This procedure can also be performed on the AV con-
troller by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Analog Audio Input Setup
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select “1. Input/Output
Assign”, and then press
[ENTER].
The “Input/Output Assign” menu
appears.
3
Use the Up and Down [ ]/[ ] but-
tons to select “5. Analog Audio
Input”, and then press [ENTER].
The “Analog Audio Input” menu
appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
6. Gamma Curve
Multich
Subwoofer Input Sensitivity
Balance
Input Channel
- - - - -
0dB
- - - - -
Stereo
1–5. Analog Audio Input
4
Use the Left and Right [ ]/[ ]
buttons to select an input selec-
tor.
You can assign the multichannel input
to the following input selectors: “DVD/
BD”, “VCR/DVR”, “CBL/SAT”,
“GAME”, “AUX1”, “AUX2”, “TV/
TAPE”, “CD”, or “PHONO”. If you
don’t want to assign the multichannel
input, set to “- - - - -”.
5
Use the Up and Down [ ]/[ ] but-
tons to select “Balance”, and use
the Left and Right [ ]/[ ] but-
tons to select an input selector:
You can assign the balanced input to
the following input selectors: “DVD/
BD”, “VCR/DVR”, “CBL/SAT”,
“GAME”, “AUX1”, “AUX2”, “TV/
TAPE”, “CD”, or “PHONO”.
If you don’t want to assign the balanced
input, set to “- - - - -”.
6
Use the Up and Down [ ]/[ ] but-
tons to select “Input Channel”,
and use the Left and Right [ ]/
[ ] buttons to select:
Stereo:
Select if the source is stereo and
you’ve connected it to the
INPUT:BALANCE L/R jacks.
Mono(L):
Select if the source is mono and
you’ve connected it to the
INPUT:BALANCE L jack.
7
Press the [SETUP] button.
The setup menu closes.