Filter
Top Products
13
Front & Rear Panels—Continued
PRE OUT: FRONT L/R, CENTER, SURR L/R,
SURR BACK L/R, and FRONT HIGH/WIDE
L/R
These multichannel analog audio outputs can be
connected to the analog audio input on a multichan-
nel power amplifier.
PRE OUT: SW1, SW2
These analog audio outputs can be connected to a
powered subwoofer. You can connect the powered
subwoofer with each jacks respectively. Level and
distance can be set individually for each output.
PRE OUT: ZONE 2, ZONE 3
These analog audio outputs can be connected to the
line inputs on amplifiers in Zone 2 and Zone 3. The
SW jacks can be connected to the inputs on pow-
ered subwoofers in Zone 2 and Zone 3.
PRE OUT: FRONT L/R, CENTER,
SUBWOOFER 1/2, SURR L/R, SURR BACK
L/R, and FRONT HIGH/WIDE L/R
These balanced XLR outputs are for connecting a
multichannel power amplifier and powered sub-
woofer.
The FRONT L/R and SURR BACK L/R outputs can
be used with front speakers and surround back
speakers, respectively, or used to bi-amp the front
speakers. See “Bi-amping the Front Speakers” on
page 21.
SIRIUS antenna
(North American models)
This jack is for connecting a SIRIUS Satellite Radio
antenna, sold separately (see the separate SIRIUS
instructions).
See pages 18 to 42 for connection information.