Filter
Top Products
70
Listening to the Radio—Continued
When tuned to an RDS station that’s broadcasting text information, the text can be displayed.
Displaying Radio Text (RT)
Notes:
• The message “Waiting” may appear while the AV con-
troller waits for the RT information.
• If the message “
No Text Data” appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
Press the [RT/PTY/TP] button
once.
The RT information scrolls across the
display.
1
Press the [RT/PTY/TP] button
twice.
The current program type appears on
the display.
2
Use the PRESET [ ]/[ ] buttons
to select the type of program you
want.
See the table on page 69.
RT/PTY/TP
PRESET /
ENTER
RT/PTY/TP
3
To start the search, press
[ENTER].
The AV controller searches until it finds
a station of the type you specified, at
which point it stops briefly before con-
tinuing with the search.
4
When a station you want to listen
to is found, press [ENTER].
If no stations are found, the message
“Not Found” appears.
1
Press the [RT/PTY/TP] button
three times.
If the current radio station is broadcast-
ing TP (Traffic Program), “[TP]” will
appear on the display, and traffic news
will be heard as and when it’s broad-
cast. If “TP” without square brackets
appears, this means that the station is
not broadcasting TP.
2
To locate a station that is broad-
casting TP, press [ENTER].
The AV controller searches until it finds
a station that’s broadcasting TP.
If no stations are found, the message
“Not Found” appears.
ENTER
RT/PTY/TP