Filter
Top Products
18
Connecting the AV controller
The AV controller is designed to be used with a separate multichannel power amplifier. You connect the AV controller’s
PRE OUT jacks to the amplifier’s inputs, and connect your speakers to the amplifier’s speakers terminals. Speaker
settings such as crossover frequency and distance are set on the AV controller.
Speaker Configuration
For 9.2-channel surround-sound playback, you need nine speakers and two powered subwoofers.
The following table indicates the channels you should use depending on the number of speakers that you have.
* If you’re using only one surround back speaker, connect it to the SURR BACK L output.
No matter how many speakers you use, two powered subwoofers are recommended for a really powerful and solid bass.
To get the best from your surround sound system, you need to set the speaker settings. You can do this automatically
(see page 56) or manually (see page 90).
Note:
Front high and front wide speakers produce no sound at the same time.
Connecting Powered Subwoofers
Using a suitable cable, connect the AV controller’s PRE
OUT: SW1, SW2 to an input on your powered sub-
woofer, as shown. If your subwoofer is unpowered and
you’re using an external amplifier, connect the PRE
OUT: SW1, SW2 to an input on the amp.
You can connect the powered subwoofer with each jacks
respectively. Level and distance can be set individually
for each output. If you use one subwoofer, connect it to
PRE OUT: SW1.
You can also connect a powered subwoofer to the AV
controller’s balanced SUBWOOFER 1 PRE OUT XLR,
SUBWOOFER 2 PRE OUT XLR jack by using a bal-
anced XLR cable.
You can connect the powered subwoofer with each jacks
respectively. Level and distance can be set individually
for each output. If you use one subwoofer, connect it to
SUBWOOFER 1 PRE OUT XLR.
Connecting Your Speakers
Number of speakers: 234567778899
Front left ✓✓✓✓✓✓✓✓✓✓✓✓
Front right ✓✓✓✓✓✓✓✓✓✓✓✓
Center ✓ ✓✓✓✓✓✓✓✓✓
Surround left ✓✓✓✓✓✓✓✓✓✓
Surround right ✓✓✓✓✓✓✓✓✓✓
Surround back* ✓✓✓
Surround back left ✓✓✓
Surround back right ✓✓✓
Front high left ✓✓✓
Front high right ✓✓✓
Front wide left ✓✓✓
Front wide right ✓✓✓
LINE INPUT
LINE INPUT
LINE INPUT
LINE INPUT
Powered subwoofer
INPUT
PRE OUT
SUBWOOFER 1
SUBWOOFER 2
INPUT
INPUT
INPUT
Powered subwoofer
Balanced XLR cable
Balanced XLR cable