Filter
Top Products
2 Raymarine Interim Sheet
2. Click Next.
The HSB2 Waypoint Transfer dialog appears.
3. Click the Change Option button.
The Waypoint Sending Option dialog appears.
4. Select the waypoints/routes you wish to send.
5. Click OK.
By default, the Waypoint/Route Transfer feature transfers all waypoints and
routes stored by RayTech. Raymarine electronics have storage limits of 1000
waypoints and 20 routes, each containing a maximum of 50 waypoints.
RayTech does not have such a limitation. If you attempt to transfer a quantity
of waypoints/routes that exceeds the waypoint/route storage capacity of the
Raymarine electronic device, RayTech notifies you accordingly.
6. When you are satisfied with the list of waypoints/routes to be transferred,
click the Send button.
The waypoints/routes are transferred to the electronic device, preserving
waypoint and route names. The button now reads Stop sending.
RayTech notifies you when the transfer has been completed.
Note: The
hsb
2
waypoint/route transfer process overwrites the entire way-
point/route list in the receiving electronic unit.
7. If the transfer does not complete or you wish to abort, click Stop sending.
➤ To receive waypoints/routes via
hsb
2
:
Note: Before transferring waypoints/routes from a Raymarine electronic de-
vice, you must first configure the unit to transmit waypoints via
hsb
2
.