Filter
Top Products
November 2003 © TOSHIBA TEC 2 - 107 e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
Image
control
Image
control
Image
control
Image
control
Image
control
Image
Image
Image
Image
control
Image
control
Image
control
Drum life correction of laser
power initial value
Image quality closed-loop
control/Contrast voltage
Image quality closed-loop
control/Laser power
Contrast voltage/Correction
gain environment setting
Image quality closed-loop
control automatic start-up/At
power-ON
Process switching for image
smoothing (Text/Photo)
Process switching for image
smoothing (Photo)
Process switching for image
smoothing (Text)
Image quality closed-loop
control automatic start-up/
Relative humidity variation
Image quality closed-loop
control automatic start-up/
Period of time unattended
Image quality closed-loop
control automatic start-up/
Accumulated print volume
Sets whether or not correcting the
laser power depending on the drum
life when the laser power initial value
is set in open-loop control.
0: Invalid 1: Valid
Sets whether or not correcting the
contrast voltage in closed-loop
control.
0: Invalid 1: Valid
Sets whether or not correcting the
laser power in closed-loop control.
0: Invalid 1: Valid
Sets whether or not switching the
correction amount once at contrast
voltage correction depending on the
environment.
0: Invalid 1: Valid
Sets whether performing closed-loop
control automatically at power-ON
when the fuser roller temperature
becomes below the specified level.
0: Invalid 1: Valid (at mode 1)
2: Valid (at mode 2)
Sets whether or not performing a
smoothing process (primary scanning
direction, 2,400 dpi or equivalent).
0: Invalid 1: Valid
Sets whether or not performing a
smoothing process (primary scanning
direction, 2,400 dpi or equivalent).
0: Invalid 1: Valid
Sets whether or not performing
closed-loop control automatically
when the relative humidity becomes
below the specified level from the
previous control.
0: Invalid 1: Valid (at mode 1)
2: Valid (at mode 2)
Sets whether or not performing
closed-loop control automatically
when the equipment has not been
used for a specified period of time.
0: Invalid 1: Valid (at mode 1)
2: Valid (at mode 2)
Sets whether or not performing
closed-loop control automatically
when the specified number of sheets
has been printed out from the
previous control.
0: Invalid 1: Valid (at mode 1)
2: Valid (at mode 2)
1
1
1
1
1
1
1
1
1
1
1
1
<0-1>
1
<0-1>
1
<0-1>
1
<0-1>
1
<0-2>
1
<0-1>
0
<0-1>
1
<0-1>
1
<0-2>
1
<0-2>
2
<0-2>
M
M
M
M
M
M
M
M
M
M
M
ALL
ALL
ALL
ALL
ALL
(color)
PPC
(black)
PPC
(black)
PPC
(black)
ALL
(color)
ALL
(color)
ALL
(color)
555
556
557
558
559
560
561
562
565
566
567
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Acceptable
value>
RAM Contents
Proce-
dure