Filter
Top Products
e-STUDIO3511/4511 ADJUSTMENT 3 - 28 November 2003 © TOSHIBA TEC
3.5.8 Setting range correction
The values of the background peak/text peak in the range correction at the Black Mode can be switched
to "varied" or "fixed" in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affects the reproduction of the background density, and the values
of the text peak affects that of the text density.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment.
<Procedure>
Procedure is same as that of "3.5.2 Density adjustment".
Item to be adjusted
Range correction for
original manually set on
the original glass
Range correction for
original set on the RADF
Remarks
The following are the default values set
for each original mode.
Text/Photo: 22, Photo: 12, Text: 22
Each digit stands for:
One's place: Automatic density mode
Ten's place: Manual density mode
The setting conditions possible are as
follows:
Background peak Text peak
1: fixed fixed
2: varied fixed
3: fixed varied
4: varied varied
Text/Photo
570
693
Photo
571
694
Text
572
695
Original mode
<Adjustment Mode (05)>