Toshiba 3511 Marine Radio User Manual


 
November 2003 © TOSHIBA TEC 4 - 5 e-STUDIO3511/4511 PREVENTIVE MAINTENANCE
Fuser unit Fuser belt [FUSER BELT]
[FUSER] Pressure roller [PRESS ROLLER]
Oil roller [OIL ROLLER]
Cleaning roller [CLEANING ROLLER]
Separation finger [PRESS ROLLER FINGER]
Fuser belt guide [BELT GUIDE]
Scraper [PRESS ROLLER SCRAPER]
Upper drawer Pickup roller [PICK UP ROLLER(1st CST.)]
[1st CST.] Feed roller [FEED ROLLER(1st CST.)]
Separation roller [SEP ROLLER(1st CST.)]
Lower drawer Pickup roller [PICK UP ROLLER(2nd CST.)]
[2nd CST.] Feed roller [FEED ROLLER(2nd CST.)]
Separation roller [SEP ROLLER(2nd CST.)]
Bypass unit Pickup roller [PICK UP ROLLER(SFB)]
[SFB] Feed roller [FEED ROLLER(SFB)]
Separation roller [SEP ROLLER(SFB)]
RADF Pickup roller [PICK UP ROLLER(RADF)]
[RADF] Feed roller [FEED ROLLER(RADF)]
Separation roller [SEP ROLLER(RADF)]
LCF Pickup roller [PICK UP ROLLER(LCF)]
[LCF] Feed roller [FEED ROLLER(LCF)]
Separation roller [SEP ROLLER(LCF)]
PFP upper drawer Pickup roller [PICK UP ROLLER(3rd CST.)]
[3rd CST.] Feed roller [FEED ROLLER(3rd CST.)]
Separation roller [SEP ROLLER(3rd CST.)]
PFP lower drawer Pickup roller [PICK UP ROLLER(4th CST.)]
[4th CST.] Feed roller [FEED ROLLER(4th CST.)]
Separation roller [SEP ROLLER(4th CST.)]
Note:
When the counter value of any of the pickup roller, feed roller and separation roller in each unit is
reset, the value of the feeding retry counter is also reset simultaneously. When the [RESET] button
is pressed after selecting the feed unit in the Main Screen, the value of the feeding retry counter is
also reset simultaneously.
The feeding retry counter:
- Upper drawer Reset the feeding retry counter (08-1390)
- Lower drawer Reset the feeding retry counter (08-1391)
- PFP upper drawer Reset the feeding retry counter (08-1392)
- PFP lower drawer Reset the feeding retry counter (08-1393)
- Bypass unit Reset the feeding retry counter (08-1394)
- LCF Reset the feeding retry counter (08-1395)
04/05