Open as PDF
“mph” is selected as the display unit at the
To switch the speedometer display units:
Push the select button for at least 1 second,
within 10 seconds after the multifunction infor-
mation center is activated. The speedometer
The tachometer shows the engine speed.
The outer numbers × 1000 r/min and display
segments on the meter show the engine
The hour meter/voltmeter has both an hour
meter function and a voltmeter function. By
switching the meter, it can be used as either
an hour meter or a voltmeter.
The hour meter is selected at the Yamaha
The hour meter shows the total number of
hours that the engine has been running since
the watercraft was new.
The elapsed time will be kept even if the bat-
tery terminals have been disconnected.
2 Select button
1 Hour meter/voltmeter
UF2N10E0.book Page 40 Tuesday, October 6, 2009 5:02 PM