140 Utilities
MX7 Reference Guide E-EQ-MX7RG-B
Enabling GrabTime
The MX7 has a GrabTime utility which can automatically synchronize the MX7 with a time
server (via an Internet connection) at boot up.
By default, using GrabTime for time synchronization at boot up is Off.
To enable GrabTime to run automatically at boot up, run \Windows\grabtime.reg and perform a
warmboot. For more detail, see “LAUNCH.EXE”, earlier in this chapter.
Note: This utility affects the behavior of GrabTime at warmboot. After a coldboot, GrabTime is
disabled.
Configuring CapsLock Behavior
To set CapsLock status to On after a warmboot, run \Windows\CapsLockOn.reg and perform a
warmboot.
To set CapsLock status to Off after a warmboot, run \Windows\CapsLockOff.reg and perform a
warmboot.
Note: Setting CapsLock to On using this method does not display the CapsLock icon in the
Windows CE taskbar. The current status of CapsLock can be changed with the CAPS
key, however this method does not change CapsLock behavior upon reboot.
Note: These utilities affect the behavior of the CapsLock on warmboot. After a coldboot,
CapsLock is disabled.
Configuring IPv6
By default, IPv6 is enabled and an IPv6 broadcast message is sent on power up.
To disable IPv6, run \Windows\ipv6Disable.reg and perform a warmboot.
To enable IPv6, run \Windows\ipv6Enable.reg and perform a warmboot.
Note: These utilities affect the behavior of IPv6 on warmboot. After a coldboot, IPv6 is
enabled.
