182 Summit Client Configuration
MX7 Reference Guide E-EQ-MX7RG-B
Global Settings
The parameters on the Global Settings panel can only be changed when an Administrator is
logged in with a password. The current values for the parameters can be viewed by the general
user without requiring a password.
Note: Tap the Commit button to save changes. If the panel is exited before tapping the Commit
button, changes are not saved!
Factory Default Settings
RX Diversity On-Start on Main
TX Diversity On
Preamble Auto
G Shorslot Auto
Roam Trigger -65 dBm
Roam Delta 10 dBm
Roam Period 10 sec.
Frag Threshold 2346
RTS Threshold 2347
Ping Payload 32 bytes
Ping Timeout 5000
Ping Delay ms 1000
LED Off
Hide Passwords On
Admin Password Blank
Certs Path System
Figure 5-6 Summit Client Utility – Global Settings tab
Global Parameters
Parameter Default Function
RX Diversity On-start on Main How to handle antenna diversity when receiving
packets from the Access Point.
Options are: Main Only (use the main antenna only),
Aux Only (use the auxiliary antenna only), On-start on
Main (on startup, use the main antenna), or On-start on
Aux (on startup, use the auxiliary antenna).
TX Diversity On How to handle antenna diversity when transmitting
packets to the Access Point.
Options are: Main only (use the main antenna only),
Aux only (use the auxiliary antenna only), or On (use
diversity or both antennas).
Preamble Auto The type of radio header, or preamble, for packets.
Options are: Auto, Short, or Long.
G Shortslot Auto 802.1x short slot timing mode.
Options are: Auto, On, or Off.
