10 Quick Start
MX7 Reference Guide E-EQ-MX7RG-B
Troubleshooting
Can’t calibrate the
touch screen, change
the date/time or
adjust the volume.
AppLock is installed and running on the mobile device. AppLock
restricts User access to running programs. Changes or modifications
require Administrator access.
Refer to “Chapter 4 - AppLock” for setup and processing information.
RFTerm opens and
runs upon each cold
reset and warm reset.
Tap File | Exit to close the RFTerm application.
The Login utility
waits for a login
name before the
MX7 can continue.
For devices with an
Odyssey Client only.
If the LXE Login Utility has
been installed, a login screen is
presented to the user after a
return from Suspend, a warm
reset and a cold reset. Type the
login name and tap OK to
continue. Tap Cancel to use the
previously entered user name.
Refer to Chapter 3 “System
Configuration”, section titled
“LXE Login Utility.”
Entering the Multi AppLock Activation Key
See Also: Chapter 4 “AppLock”.
Hotkey
If the mobile device uses LXE’s Multi AppLock to allow the user to switch between two
applications, the default Activation key is Ctrl+Spc. The key sequence switches the focus
between one application and another. Data entry affects the application running in the foreground
only. Note that the system administrator may have assigned a different key sequence to use when
switching applications.
Touch
Tap the taskbar icon to place the popup menu on screen. Tap one of the application icons in the
popup menu. The selected application is brought to the foreground while the other application
continues to run in the background. Stylus taps affect the application running in the foreground
only.
