A SERVICE OF

logo

Open as PDF
next previous
190 Summit Client Configuration
MX7 Reference Guide E-EQ-MX7RG-B
WPA PSK Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config tab.
Enter the SSID of the Access Point assigned to
this profile.
Set Auth Type to Open.
Set EAP Type to None.
Set Encryption to WPA PSK.
Tap the WEP/PSK Keys button.
Figure 5-15 Configure a Summit Profile with WPA PSK
Figure 5-16 PSK Entry Popup
Enter the Passphrase in the PSK Entry popup text entry box. This value can be a 64 hex character
or an 8-63 byte ASCII value. Tap OK
Tap the Commit button to save the new profile configuration.
Perform a Warm Reset function to connect using the new profile configuration.