Summit Client Configuration 183
E-EQ-MX7RG-B MX7 Reference Guide
Parameter Default Function
Roam Trigger -65 dBm If signal strength is less than this trigger value, the
radio looks for a different Access Point with a stronger
signal.
Options are: -50 dBm, -55, -60, -65, -70, or -75 dBm.
Roam Delta 10 dBm The amount by which a different Access Point signal
strength must exceed the current Access Point signal
strength before roaming to the different Access Point is
attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, or 35 dBm.
Roam Period 10 sec The amount of time to be used to collect signal
strength information from an Access Point before a
roaming decision is made.
Options are: 5 sec, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55, or 60 sec.
Frag Thresh 2346 If the packet size (in bytes) exceeds the specified
number of bytes set in the fragment threshold, the
packet is fragmented (sent as several pieces instead of
as one block). Use a low setting in areas where
communication is poor or where there is a great deal of
radio interference.
Options are: Any number between 256 bytes and 2346
bytes.
RTS Thresh 2347 If the packet size exceeds the specified number of
bytes set in the Request to Send (RTS) threshold, an
RTS is sent before sending the packet. A low RTS
threshold setting can be useful in areas where many
client devices are associating with the Access Point.
Options are: Any number between 0 and 2347.
Ping Payload 32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 512, or 1024 bytes.
Ping Timeout
ms
5000 The amount of time, in milliseconds, that a device will
be continuously pinged. The Stop Ping button can be
tapped to end the ping process ahead of the ping
timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay ms 1000 The amount of time, in milliseconds, between each
ping after a Start Ping button tap.
Options are: Any number between 0 and 30000 ms.
LED Off The LED on the radio card is not visible to the user
when the radio card is installed in a sealed mobile
device.
Options are: On, Off.
