Software Setup 23
E-EQ-MX7RG-B MX7 Reference Guide
Applying the Protective Film to the Display
First, clean the display of fingerprints, lint particles, dust and smudges.
Remove the protective film from its container. Remove any protective backing from the film sheet
by lifting the backing from a corner of the film. Discard the backing.
Apply the film to the screen starting at one side and smoothing it across the display. If air bubbles
appear, raise the film slightly and continue smoothing the film across the display until it covers
the glass surface of the display.
If dust, lint or smudges are trapped between the protective film and the glass display, remove the
protective film, clean the display and apply the protective film again.
Copy the MX7 LXEbook to the MX7 (Optional)
Note: The LXEbook user guides do not contain the illustrations and regulatory information
contained in the full user guides on the LXE Manuals CD and on the LXE ServicePass
website. See the full format User Guide”MX7 User’s Guide” on the LXE Manuals CD.
Mobile Device Required Adobe Acrobat Reader Version
MX7 Windows CE PDF Viewer (pre-installed).
First, using your desktop computer download “LXEbook – MX7 Users Guide” from the LXE
Manuals CD to your desktop computer.
Next, refer to “ActiveSync Processes” and “Initial Install” in Chapter 3 of this guide before
connecting the MX7 to your PC.
When the MX7 and the desktop ActiveSync applications are synchronized, tap Explore on the
ActiveSync menu on your PC to display the contents of the MX7 folders.
Then, open the folder on your desktop computer containing the downloaded LXEbook. Tap and
drag the LXEbook to the My Documents folder on the MX7.
When the file copy process is finished, disconnect the MX7 from the synchronization equipment
and close ActiveSync.
To view the LXEbook on the MX7, select Start / Programs / Microsoft File Viewers / Microsoft
PDF Viewer / File / Open. Locate the LXEbook on the MX7 and “open” the file.
See Also: “Install LXEbooks” on the LXE Manuals CD.
