Summit Client Configuration 181
E-EQ-MX7RG-B MX7 Reference Guide
Diags
The Diags panel can be used for troubleshooting network traffic and radio connectivity issues. It
can also be used to update the radio driver on the MX7. Administrator login is required for the
(Re)connect button function. Diagnostics, Update Driver and Site Survey functions are not
available in this release.
Figure 5-5 Summit Client Utility – Diags tab
Buttons
Button Function
(Re)connect Tap this button to apply, or reapply, the current config profile and attempt to
associate or authenticate to the wireless LAN. Activity is logged in the
Diagnotic Output text box on the lower part of the panel.
Release/Renew Release the current IP address to obtain a new IP address. This option renews
the IP address when applicable. Activity is logged in the Diagnostic Output
text box. If a fixed IP address has been assigned to the radio, this is also
noted in the Diagnostic Output box. Note that the current IP address is
displayed next to the Release/Renew button.
Start Ping Tap the text box and type an IP address to Ping. Tap the Start Ping button to
start pinging the IP address. The button name changes to Stop Ping. Tap Stop
Ping to end the pinging process. The pinging process ends when any other
button on this panel is tapped or a different menu tab is selected. Ping results
are displayed in the Diagnostic Output text box.
Diagnostics Tapping this button begins an attempt to (re)connect to the wireless LAN.
This option provides more data in the Diagnostics Output text box than the
(Re)connect option. The data dump includes radio state, profile settings,
global settings, and a list of access points by SSID broadcasting in the radio’s
immediate area. Not available in this release.
Update Driver Tap this button to begin the process to update the radio driver via a dialog
box and a power cycle. The radio driver file needs to be accessible to the
user. Not available in this release.
Site Survey Not available in this release.
