144 Utilities
MX7 Reference Guide E-EQ-MX7RG-B
If the LXE Login Utility prompt is closed by pressing Esc or tapping the Cancel button on the
screen, the username change is ignored and the previously configured username is used.
User Name Typed User Name Cleared
Figure 3-43 Enter / Select Login Name
If the username is cleared, the OK button is disabled. This prevents the user from accidentally
clearing the username before continuing.
After leaving this prompt, by pressing either Enter or Esc (or tapping the OK or Cancel buttons),
the Odyssey Client is displayed.
Figure 3-44 Odyssey Client Screen
Press the Spc key or check the Connect to: box. The Status changes from disconnected to
searching for access point. After the access point is found, the password prompt is displayed.
The <user> shown in the password prompt should match the username typed in the LXE Login
Utility.
