Summit Client Configuration 177
E-EQ-MX7RG-B MX7 Reference Guide
Main
Factory Default Settings
Main
Admin Login SUMMIT
Radio Enabled
Active Config Default
Figure 5-1 Summit Client Utility – Main tab
The Main tab displays information about the radio including:
• SCU (Summit Client Utility) version
• Driver version
• Regulatory Domain
• Copyright Info
• Active Config profile
• Status of the radio (Down, Associated, etc).
The Active Config (profile) can be switched without logging in to Administrator mode.
When the profile named “ThirdPartyConfig” is chosen as the active profile, the Summit Client
Utility passes control to Windows Zero Config for configuration of all radio and security settings
for the radio module. See “Wireless Zero Config Utility” later in this chapter for Wireless Zero
Config instruction.
The Disable Radio button can be used to disable the radio card. Once disabled, the button label
changes to Enable Radio.
The Admin Login button provides access to editing radio parameters. Config and Global Settings
may only be edited after entering the Admin Login password. The password is case-sensitive.
Once logged in, the button label changes to Admin Logout. To logout, either tap the Admin
Logout button or exit the SCU without tapping the Admin Logout button.
