22 Software Setup
MX7 Reference Guide E-EQ-MX7RG-B
Set The Audio Speaker Volume
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
Figure 1-19 Speaker Location
The speaker is located on the front of the device above the MX7 logo. The audio volume can be
adjusted to a comfortable level for the listener. The volume is increased or decreased one step
each time the volume key sequence is pressed. The device has an internal speaker and a jack for
an external headset. Operational “beeps” are emitted from the speaker.
Using the Keypad
Note: Volume & Sounds (in Control Panel) must be enabled before the following key sequences
will adjust the volume.
To adjust speaker volume:
• Tap the Orange key then the Scan key to enter Volume change mode.
• Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
• Press the Enter key to exit this mode.
Using the Touchscreen
Tap the | Settings | Control Panel | Volume & Sounds | Volume tab.
Figure 1-20 Volume & Sounds Properties
Change the volume setting and tap OK to save the change. You can also select / deselect sounds
for key clicks and screen taps and whether each is loud or soft.
As the volume scrollbar is moved between Loud and Soft, the computer will emit a tone each time
the volume increases or decreases in decibel range.
