Filter
Top Products
3-7
Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 10.x
Chapter 3 Upgrading Cisco Unity Connection
Prerequisites for Upgrade
Upgrade the subscriber server following the steps mentioned in the Upgrading the Unity
Connection Server, page 3-7 section.
Switch to the upgraded software first on the publisher server and then on the subscriber server
following the steps mentioned in the Switching to the Upgraded Version of Unity Connection
Software, page 3-8 section.
9. Confirm that publisher server has Primary status and subscriber server has Secondary status.
Upgrading the Unity Connection Server
To Upgrade the Unity Connection Server
Step 1 Do any one of the following:
• Copy the ISO file to a folder on an FTP or SFTP server that the Unity Connection server can access.
• Insert the DVD with the ISO file of the Unity Connection server that you want install into the disk
drive of the server.
Step 2 Sign in to Cisco Unified Operating System Administration.
Step 3 From the Software Upgrades menu, select Install/Upgrade.
Step 4 On the Software Installation/Upgrade page, in the Source field, select any one of the following:
• Remote Filesystem: Select this option to upgrade from remoter server and follow this procedure.
• DVD/CD: Select this option to upgrade from disk drive and move to Step 10.
Step 5 In the Directory field, enter the path of the folder that contains the upgrade file.
If the upgrade file is located on a Linux or Unix server, you must enter a forward slash (/) at the beginning
of the folder path. (For example, if the upgrade file is in the upgrade folder, you must enter /upgrade).
If the upgrade file is located on a Windows server, you must use the applicable syntax for an FTP or
SFTP server such as:
–
The path must begin with a forward slash (/) and contain forward slashes throughout instead of
backward slashes (\).
–
The path must start from the FTP or SFTP root folder on the server and must not include a
Windows absolute path that starts with a drive letter (for example, C:).
Step 6 In the Server field, enter the server name or IP address.
Step 7 In the User Name field, enter the alias that will be used to sign in to the remote server.
Step 8 In the User Password field, enter the password that will be used to sign in to the remote server.
Step 9 In the Transfer Protocol field, select the applicable transfer protocol and select Next.
Step 10 Select the upgrade version that you want to install and select Next. The upgrade file is copied to the hard
disk of the Unity Connection server. When the file is copied, a screen displaying the checksum value
appears.
Step 11 Verify the checksum.
Step 12 On the next page, monitor the progress of the upgrade.