Filter
Top Products
Saving
Present Position
as
a
Waypoint
(Quick
Save
Feature)
•
The UltraNav II lets
you saveyour present position
as
awaypointwith only
•
one
key press.
This "Quick Save" feature lets
you easily
save the
position
•
of a wreck or other locations.
To save
your present position
as
waypoint, simply press
the
WAYPT
•
QU
ICKSAVE
key.
The UltraNav II takes
yourpresent
position
and
assigns
•
the first
available
waypont
number to it.
Saving
Present Position
-
View and Save Method
I The "Quick Save" feature doesn't let
you
select the
waypoint
number. You
have to use the next available number when
using
that method. The View
and Save method lets
you pick
the
waypoint
number that
your present
position
is stored in.
(Note:
You can store
a
position
under a
waypoint
number that
already
has a
position assigned
to it
using
this
method.)
To
save
your present position, press
the WAYPT
key.
Now
press
the
key
next
to the "V/PT SAVE" label. A screen similar to the one
below
appears.
The first
waypoint
number in
the list
appears
at the
top
of the
page.
This is the number that
your
present position
will be
under. Your
position
at
the
time
you pressed
the
WAYPT
key
is shown in the
"CURRENT POSITION" box in
the middleof the screen. If
you
wish to save the location in the
CURRENT POSITION box un-
der this
waypoint number,
sim-
ar
I....
FJ
EHT
To save the location
underadifferentwaypoint
number,
press
the
key
next
to increase
the
waypoint
number
(i.e.
from
waypoint
number ito
2).
Press the
key
next to the
"-
WPT" label to decrease the
waypoint
number. Once
you've
decided the
waypoint
number to save the
location
under, press
the
key
next to the "USE CURRENT
POSITION"
label. Then
press
the
key
next to the "SAVE"
label. This will store the
location under the
waypoint
number
you
selected and return to the last
used
position, plot,
or
navigation
screen.
62
H 36°08.866'
Ui 96°EQ.441'
Pressing
the
key adjacent
to
the "2X/4X" label
enlarges
ech-
oesfromtwotimestofourtimes
their normal size.
To switch between the
split
screen zoom and full screen
zoom, press
the
key adjacent
tothe "SPLIT/FULL' label. The
screen
instantly splits
into two
sections. All
targets
on the left
are shown at four times the
size
of the ones on the
right.
If
you
switch to the 2X zoom
mode,
echoes
on the left side
of the screen are shown at twice the size as the ones on
the
right.
The echoes that
scroll across the screen are
the exact same
echoes on both sides of
the screen.
They're simply enlarged
on
the left
side. This feature tracks the
bottom, keeping
it on the
display
at all
times,
when.the
automatic feature
is on. Once
you've
set the zoom as
desired,
press
the CLEAR
key
to
erase the menus.
ZOOM
-
MANUAL MODE
When
you
press
the zoom
key
while the unit is in the manual
mode,
the
screen shown below
appears.
All of the menus on this screen work
identically
as
described above.
However,
one additional menu item is
shown when the unit is in the manual
mode: "ADJUST".
To
adjust
the
zoom,
press
the
key adjacent
to the "ADJUST" label. A
screen
similar to the one below
appears.
A zoom bar and
adjust
arrows
appear
on the screen. The echoes on the left side of
th.e
screen are the
ones
that
appear
between the
top
and the bottom of the zoom bar. Press
the
up
or down
arrow
keys
to
ove the zoom bar
up
or down.
As
you
adjustthe
zoom
bar,
the
echoes move on the
left side of
the screen at the same time.
The
zoom
adjust
menus will
automatically
clear a few sec-
onds after
you've pressed
the
last
key.
Remember,
the
UltraNav
II won't track the bot-
tom when it's in the
manual
mode.
N
_.c'__•.__'
ILON
CJJPRENT.F'iJi.T1ON
H4NGE
FIELD
ply press
the
key
next to the "USE CURRENT POSITION" label. The
• position
shown in the
CURRENT POSITION
box also will show in the
waypoint
location at the
top
of the screen. To save the
waypoint
without
naming it; simply press
the
key
next to the "SAVE" label.
hst ri
37.3
tafl
0.
15
PDF compression, OCR, web-optimization with CVISION's PdfCompressor