Filter
Top Products
98
Settings
To silence an alarm:
When an Alarm is triggered, a tone will sound and a alarm window will appear on
the screen. Press ENTER to silence the alarm and close the alarm window.
After alarm is silenced its corresponding alarm bell will continue to ash
in the bottom left corner of the screen. To remove the bell from the screen,
disable the alarm and then enable it again. The bell will not reappear unless
the alarm is triggered.
Set Limit
Sets thresholds (limits) that will trigger the alarm when met or exceeded. If a
threshold can be set for a particular alarm, the Set Limit button will appear at the
bottom of the screen when that alarm is highlighted on the alarm list.
To set alarm limit:
Highlight the desired alarm on the alarm 1.
screen and press MENU.
Select 2. Set Limit and press ENTER. The
Alarm Limit keypad will appear.
Input the desired alarm threshold and 3.
press ENTER.
Siren Enabled
When the Siren is enabled, a tone will sound when an
alarm is triggered. To enable alarm sirens, highlight
Siren Enabled on the Alarms menu and press
ENTER.
Set limit selected on Water
Temp Rate menu