Filter
Top Products
36
Sonar
Fish ID
Displays sh echoes as sh symbols instead of
sh arches with or without depth. This makes
it easier to recognize sh on the sonar display.
Symbols — places a sh symbol where a
sh is detected.
Depths — places depths above each sh
detected; helps gauge the distance from each
sh symbol to the boat.
Both — turns on both Symbols and Depths.
To select Fish ID option:
Highlight 1. Fish ID and press ENTER.
Use the keypad to select 2. Symbols, Depths or Both and
press ENTER.
Log Sonar Data
Used to save sonar chart data to your unit’s internal memory or to an MMC/SD
card.
To access the Sounder Logging menu, select
Log Sonar Data from the Sonar menu and press
ENTER.
Log Sonar Menu
Filename
Input the desired name for the sonar log le
Save to
Selects location where sonar log will be saved/stored
Bytes
Controls number of bytes per sounding. More bytes yields
better resolution/shorter logging time; conversely, fewer
bytes produces longer sonar logs/lower resolution
Time Remaining
Recording time left until memory storage runs out
Fish Symbols and Depths