Filter
Top Products
100
Settings
Time Period
Controls how much time will pass before a point is placed along the trail.
To set Time Period:
Highlight 1. Time Period and press
ENTER. The distance period keypad
will appear.
Input the desired distance and select 2.
OK. Press ENTER.
Units
Controls the unit of measure used for a variety of
data, ranging from distance and speed to heading and
barometric pressure. To access the Units menu, select
Units from the Settings menu and press ENTER.
To change a unit of measure:
Select a unit from the Units menu. Press 1.
ENTER.
Select the a unit of measure and press 2.
ENTER.
Time Period set to 5 seconds