Lowrance electronic HDS-5 Fish Finder User Manual


 
99
Settings
Trails
Controls the way trails are logged (updated).
Trails mark your movement as you travel,
placing points along your path using one of
three logging types: Time, Distance or Auto.
You can save up to 10 trails with up to 9,999
points per trail. If a trail exceeds 9,999 points,
each new point will overwrite a point at the
beginning of the trail.
Logging Type
Controls the method used for updating a trail. Trails can be updated using Time,
Distance or the default automatic setting.
Logging Types
Time
A point is placed along the trail after a selected amount of time
Distance
A point is placed along the trail after you travel a selected distance
Auto
A point is placed along the trail every time you change direction
To select a Logging Type:
Highlight 1. Logging Type on the Trails menu and press ENTER.
Use the keypad to select 2. Auto, Distance or Time and press ENTER.
Distance Period
Controls how far you will travel before a point is placed along the trail.
To set Distance period:
Highlight 1. Distance Period and press
ENTER. The distance period keypad
will appear.
Input the desired distance and select 2.
OK. Press ENTER.
Trails Menu
Distance Period set to 1nm