84
Settings
Water Speed Averaging
Averages water speed by measuring your speed at a selected interval. Water speed
intervals range from one to 30 seconds. If you select ve seconds, your water speed
will be recorded every ve seconds, then averaged.
To select a Water Averaging interval :
Highlight the 1. Water Speed Averaging box on the Installation menu.
Press the keypad left/right to select the desired interval.2.
Highlight 3. OK and press ENTER.
Temperature Calibration
When there are differences in temperature data,
Temperature Calibration calibrates data from one
temperature sensor with date from another temperature
source. That ensures the accuracy of temperature data
from the selected temperature sensor.
To calibrate Temperature:
Select the 1. Temperature Calibration text box from the Installation
menu and press ENTER. The Water Temperature Calibration dialog
box will appear.
Use the arrow keys to enter the percentage difference between 2.
temperature sources. Select OK and press ENTER.
Temperature Averaging
Averages temperature by measuring temperature
data at a selected interval. Temperature intervals
range from one to 30 seconds.
If you select ve seconds, your temperature will be averaged using measurements
taken every ve seconds.
NOTE: If the temperature sensor is reading a lower
temperature than the other temperature source, you will input a
positive (+) percentage. Conversely, a negative (–) percentage
will be entered if the temperature sensor is reading a higher
temperature than the other temperature source.
Water Temp
calibration dialog box