105
Settings
To congure device location:
Select a device from the device list and press 1. ENTER. The Device
Information screen will appear.
Highlight the 2. Congure button and press ENTER. The Device
Conguration screen will appear.
Highlight the 3. Location dropdown menu and press ENTER.
Select the desired location and press 4. ENTER.
Instance
You can change a device instance from the Device Conguration screen. This,
however, should only be attempted by a qualied technician.
Calibrating devices
Several devices can be calibrated from the devices list including Fluid Levels, Fuel
Flows and Trim Tabs. Every device that can be calibrated from the devices list, will
have a calibrate button on the Device Information screen. The calibrate button opens
the Device Calibration screen, which has onscreen calibration instructions for the
device.
To access calibration instructions:
Select the desired device from the device list and press 1. ENTER.
Highlight the 2. Calibrate button on the Device Information screen and
press ENTER. Follow the onscreen calibration instructions.
NOTE: For more information on device calibration, refer to
the documentation that came with your device.
Calibrate button
Calibration instructions for a
uid level