Lowrance electronic HDS-5 Fish Finder User Manual


 
107
Settings
Serial Ports
Congures communication ports to send or receive data with another electronic
device, like an autopilot.
To congure serial ports:
Highlight 1. Serial Ports on the Network menu
and press ENTER. The Serial Settings
menu will appear.
Select the desired setting (Protocol, 2.
Communication Port 1 or Communication
Port 2) and press ENTER.
Use the keypad to select the desired option 3.
and press ENTER.
Highlight 4. OK and press ENTER.
NMEA 0183 Output
Controls NMEA 0183 sentences used, allowing you to select the type of messages
your unit will transmit when communicating with other NMEA 0183 devices. The
default setting will work well under most conditions.
To access NMEA 0183 Output screen:
Select 1. NMEA 0183 Output from the
Network menu and press ENTER.
Highlight a desired sentence and press 2.
ENTER to turn it on/off.
To nalize changes, select 3. OK and
press ENTER.
NMEA 0183 Output screen
Serial settings menu