Filter
Top Products
106
Settings
Diagnostics
Displays diagnostic information on NMEA 2000 networks displays the status of
information shared between units (UDB). From the UDB tab, you also can select a
unit to be used as the master (primary) unit when sharing information.
To access the Diagnostics screen, select Diagnostics from the Network menu and
press ENTER.
NMEA 2000 receive/send waypoint
Turns on/off the unit’s ability to send and receive
waypoints across a NMEA 2000 network.
NMEA 0183 receive waypoint controls the
unit’s ability to receive waypoints over a
NMEA 0183 network.
To turn on/off NMEA send/receive waypoint commands, highlight the desired
NMEA send/receive option and press ENTER.
NMEA 2000 receive waypoint
turned on
Diagnostics screen: NMEA 2000
Diagnostics screen: UDB