User Interface
This information will familiarize you with the typographical
conventions, display function, and general terms used in this manual.
* In the text portion of this manual the 978 key names are shown
with brackets on both sides and in boldface (e.g., [FUNCTION],
[SETUP], etc.).
* When a key is momentarily depressed, the word "press" will be
used (e.g.; Press [FUNCTION]).
* Information that will appear in
the display window will be
shown with quotation marks
on each side and in boldface
(e.g.; "READ REFERENCE").
* The (-) and (+) symbols
indicate which direction a
value can be changed. The
(→) symbol moves the cursor
under the desired value to be
edited.
* A "hand" indicates important
notes and possible operations
that need to be performed
before the normal operation.
* When a procedure is
continued on the next page, an
"arrow" will appear in the
bottom right hand corner of
the page.
READ REFERENCE
FUNCTION SETUP REF
CAL STORE
(-)
(+)
( )
é
*
vii
L*
FUNCTION SETUP REF
CAL
STORE
(-)
(+)
( )
C* H*
1.00 1.00 1.00
DECREASE INCREASE MOVES
CURSOR
