A SERVICE OF

logo

8.7 Troubleshooting Tips
A. Incorrect measurement data continually displays.
1. Recalibrate unit.
2. Clean Optics.
3. Contact authorized service center.
B. Unit does not turn on.
1. Check for low batteries.
2. Contact authorized service center.
C. Display not working.
1. Check for low batteries.
2. Contact authorized service center.
D. Reading Drifts.
1. Clean Optics.
2. Recalibrate unit.
3. Contact authorized service center.
E. Unit will not calibrate properly.
1. Dirty reference.
2. Optics dirty.
3. Contact authorized service center.
8-9