SECTION 4
ABSOLUTE COLOR &
SIMPLE COMPARE OPERATION
Subjects covered in Section 4:
* 4.1 Absolute Color and Simple Compare Setup
* 4.2 Simple Compare Reference Entry
* 4.3 Absolute Color and Simple Compare Measurements
The 978 has two alternate measurement functions that can be selected:
Absolute Color and Simple Compare. These two functions can be used for
"scratch pad" measurement operation. The color space, illum/obs
combination, and averaging can be set for these functions.
4.1 Absolute Color and Simple Compare Setup
The color space, illum/obs, and averaging can be set for absolute color
and simple compare measurements. The two functions share the same
setup procedure. If a QC function is selected (i.e.; pass/fail, 555), the
absolute color and simple compare settings will change to the last QC
setup selected.
To setup functions:
1) Press the [FUNCTION] key to select
"ABSOLUTE COLOR" or "SIMPLE
COMPARE."
FUNCTION =
FUNCTION SETUP REF
ABSOLUTE COLOR
ABSOLUTE COLOR
SIMPLE COMPARE
4-1
➩
